Delta Electronics AH500, Manual

Page: 440 / 547

C h a p t e r 8 E l e c t r o n i c C a m
8.4.2 Function Block—T_CamCurve
1. Creating a cam chart: Users have to create a blank cam chart in PMSoft, and then set resolution
in accordance with the number of rotary cut curves. In order to create a rotary cut curve, the
users need to type 300 in the
Resolution box. Download the cam chart to an AH500 series
motion control module. When the AH500 series motion control module operates, electronic cam
data is stored in the cam chart.
2. Setting the motion control function block T_CamCurve: Users have to set the parameters
related to a rotary cutter, including the distance for which the master axis specified moves, the
distance for which the slave axis specified is synchronized with the master axis specified, and
the synchronization ratio of the speed of the slave axis specified to the speed of the master axis
specified. After the motion control function block T_CamCurve is executed, a rotary cut curve
will be created.
Input pin
Name Function
Data
type
Setting value Description
Axis
Motion axis
number
WORD 1~16 Slave axis number
8 - 2 1