DMS-R-IM
Installation
April 7, 2021
Digital Modular System - Rinse
3-10
3.5.1
Step-By-Step Guide
NOTE
If your system utilizes manual top-loading of solution instead
of a plumbed fill line (depending upon your process) this
connection will not be necessary.
NOTE
If you utilize a closed loop water system, the wash tank(s)
may be connected to that instead.
NOTE
For optional features, these installation recommendations are
for the most frequently used configurations and options on
Crest console systems.
Please contact Crest if you need additional information.
Please follow instruction below to install the
plumbing lines
for your console.
No.
Description
1
Refer to plumbing schematic provided.
Observe all precautions and installation procedures required for
your industry and location.
2
Locate the utility connections at the rear of the console. They are
typically provided as stub-outs near the bottom of the machine, but
this configuration may vary from one system to another, based upon
differing customer requirements.
3
Connect
Fill
for
Rinse Stations
to water source or chemical source.
4
Connect all drain lines to unrestricted factory drain(s).
