CREST ULTRASONICS DMS-1218, Instruction Manual

Page: 122 / 195

DMS-R-IM Interpreting HMI
April 7, 2021
Digital Modular System - Rinse
5-19
No. Description
* 3
[SONIC] button – Press to turn on/off the respective station ultrasonic
module.
Note : “ * ” is optional item.
5.7.3 Misc. 3 Screen
Figure 5-13: Misc. 3 screen (DMS-1218 & DMS-1826)
No. Description
* 1
Conductivity (mS)

Real time displays conductivity reading (mS).

Low Alarm Limit Set Point (mS) – Set low conductivity alarm set
point. Alarm message “LOW CONDUCTIVITY ALARM” will
prompt when conductivity reading is lower than this set point.

High Alarm Limit Set Point (mS) – Set high conductivity alarm set
point. Alarm message “HIGH CONDUCTIVITY ALARM” will
prompt when conductivity reading is higher than this set point.

High Conductivity Refill Set Point – Set DI water refill set point
when conductivity reading is higher than high conductivity set
point.
*continue to next page
1