DMS-R-IM
Operation
April 7, 2021
Digital Modular System - Rinse
4-13
4.6
Clean, Drain And Fill Water
WARNING
Cleaning bath inside the tank(s) may remain hot for a period
of time after the system is turned off. Ensure the bath has
cooled off before draining. Otherwise, it will cause burn mark
on the tank wall.
CAUTION
Generators should be kept dry all the time. Do not allow
moisture or chemicals to collect on or near ultrasonic
generators.
CAUTION
Always remember not to completely drain this tank. Ensure
pH probe sensor surface always in wet contact.
(Applicable when purchase pH monitoring feature)
CAUTION
The pH probe sensor in wash tank need to be moist at all time.
When not in use, remove probe sensor from tank, store it in a
cap filled with storage solution.
(Applicable when purchase pH monitoring feature)
NOTE
If ball valves have been adjusted, ensure that they are
returned to their original position, as stated in plumbing
drawing.
Refer to plumbing drawing for more detail.
NOTE
“
*OPTIONAL
” wording will be displayed on the touch
screen when the particular option is not purchased by user or
the option is not enabled in the Setup 6 screen.
Note
: User can enable/disable options if applicable in the
Setup 6 screen by access level as Administrator.
The clean, drain and fill steps shall be performed prior to commissioning of the
equipment for production. This is to ensure the tanks and the plumbing
