DMS-R-IM
Safety
April 7, 2021
Digital Modular System - Rinse
1-4
WARNING
High voltages exist in this machinery when the electrical
power is turned on. Always disconnect power when servicing
machine. When operating the system, observe all practical
precautions for the use of high voltage machinery, as dictated
by applicable electrical codes and regulations. Observe all
operating precautions as they are stated throughout this
manual.
WARNING
Countertops on the console can become
HOT
after extended
periods of operation. Use protective gloves and other
protective clothing.
WARNING
Tank walls remain hot for a period of time after the machinery
is turned off. Therefore, you should exercise appropriate
caution when performing cleaning and maintenance
operations. Wear gloves and other protective clothing, or wait
until the tank walls have cooled.
WARNING
(Applies only to system with dryer):
The drying system
generates heat above 200°F. Therefore, parts that have been
dried will be extremely
HOT
. Do not touch them with bare
hands until cooled; or, use protective gloves.
WARNING
Ultrasonic cleaning equipment and chemicals should be used
only by personnel specifically trained for their use. This
training should include electrical safety, machine operation,
familiarity with the cleaning chemicals, and emergency
procedures.
WARNING
Cleaning bath inside the tank(s) may remain hot for a period
of time after the system is turned off. Ensure the bath has
cooled off before draining. Otherwise, it will cause burn mark
on the tank wall.
