DMS-R-IM
Safety
April 7, 2021
Digital Modular System - Rinse
1-6
1.4
General Precaution
Several hazards may be present when operating or servicing the system and
extreme caution must be exercised at all times.
The hazards that may be encountered include:
Electrical hazards
Mechanical hazards
Lifting hazards
Chemical hazard
Compressed air hazard
Heat and hot surface hazards
Existence of hazards on this system is indicated by the use of safety labels that
are fixed in a visible manner.
The use of controls, replacement parts, adjustments or procedures other than
those specified within this manual may result in exposure to any of these
hazards.
The degree of seriousness of the hazards is indicated by the use of the following
signal words:
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, is extremely likely to result in death or serious
injury. (Note that this signal word is limited to the extreme
situations.)
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided may result in minor or moderate injury. It is also
used to alert the user against unsafe working practices and
potential damage to the system.
