DMS-R-IM
Operation
April 7, 2021
Digital Modular System - Rinse
4-36
4.13
Remote and Local Mode
This ultrasonic cleaning system is able to interface with Crest automated
material handling system - RIGIBOT to transports the basket with parts from
station to station to undergo a series of configurable cleaning and drying
process upon retrofitting the console.
Remote
mode - To begin an Auto mode cleaning process with the help of
RIGIBOT, user MUST switch ALL stations to
Remote
mode at each Station
Touch Screen (Applicable when integrated with RIGIBOT).
Note
:
ALL
stations must be switched to Remote mode. Otherwise, alarm will
prompt to alert user which station is yet to be switched.
Local
mode: When user desires to operate the cleaning process manually
(without the use of RIGIBOT), ensure the system is in
Local
mode. User can
configure the cleaning parameter at the relevant Station Touch Screen.
Note
: User must
disable
the selected station tank at Process Tank Configurator
screen at Main Touch Screen first before changing the corresponding station
into
Local
mode. Machine system power may be turned off if this is not done
beforehand. (Applicable when integrated with RIGIBOT)
Local
mode
Remote
mode
RIGIBOT cannot be triggered to move;
user must manually place the basket
at selective station without using
RIGIBOT.
Utilize RIGIBOT to transport basket
from station to station by configuring
the setting in Main Touch Screen.
Note
: User is strictly advised to keep
distance from the moving part of this
machine for safety reason.
Press
[CYCLE START]
button at
respective station to begin
spraying/ultrasonic/drying process
Press
[Stop/Run]
button at control
panel to begin Auto cycle cleaning
process.
Process setting in
Station Touch
Screen
overwrites setting in Main
Touch Screen, i.e. Cleaning parameter
follows the setting in
Station Touch
Screen
.
Process setting in
Main Touch Screen
overwrites setting in Station Touch
Screen, i.e. Cleaning parameter follows
the setting in
Main Touch Screen
.
User can trigger component (heater,
sprayer, lifter, etc.) to turn ON/OFF in
Manual Function screen of each
Station Touch Screen
.
User can trigger component (heater,
sprayer, lifter, etc.) to turn ON/OFF in
Manual Function screen at
Station
Touch Screen
.
