DMS-R-IM
Preventive Maintenance
April 7, 2021
Digital Modular System - Rinse
6-3
WARNING
Ultrasonic cleaning equipment and chemicals should be used
only by personnel specifically trained for their use. This
training should include electrical safety, machine operation,
familiarity with the cleaning chemicals, and emergency
procedures.
WARNING
Cleaning bath inside the tank(s) may remain hot for a period
of time after the system is turned off. Ensure the bath has
cooled off before draining. Otherwise, it will cause burn mark
on the tank wall.
CAUTION
The pH probe sensor in wash tank need to be moist at all time.
When not in use, remove probe sensor from tank, store it in a
cap filled with storage solution.
(Applicable when purchase pH monitoring feature)
NOTE
Users are encouraged to read through the section on safety
and hazard awareness before servicing the system.
Safety precautions should always be taken when any servicing or maintenance
task is done to the system to avoid any untoward incidents. Ensure that the
following precautions are observed at all times.
The main power switch is
OFF
.
System has to be disconnected and locked out.
Avoid touching or holding sharp edges or protrusion and hot surface.
Wear appropriate personal protection equipment (PPE) as required.
Follow standard safety regulation and procedures.
6.3
Buddy System
Only qualified personnel trained in the safe installation and operation of this
system should perform the maintenance on this system. It is strongly
recommended that a buddy system be implemented during all maintenance
work. It is extremely hazardous to be performing work alone.
