DMS-R-IM
System Overview
April 7, 2021
Digital Modular System - Rinse
2-6
2.2.1
General Specifications
The features of this station are as follows:
Item
Feature
Tank Dimensions
Model: DMS-1218
12" x 18" x 13” (10”)
(left to right X front to back X depth (liquid depth))
Model: DMS-1826
18" x 26" x 18” (16”)
(left to right X front to back X depth (liquid depth))
Overall
Dimensions
Model: DMS-1218
22" x 40" x 40”
(left to right X front to back X height)
Model: DMS-1826
31" x 46" x 44”
(left to right X front to back X height)
Process
Over Flow Rinse. Option Spray/ Air-Knife Pass through
Chemistry
Deionized Water, Inhibitor (if required)
Automation
Compatible with DMS brand automation system(s).
Facilities
3-4 GPM (8-9 GPM on demand) DIW @ 1-2 Mohm, 30-40
psi and process temperature, unrestricted floor drain.
Power
Requirement
Model: DMS-1218
240V / 3-phase / 60Hz / 16Amps
Model: DMS-1826
240V / 3-phase / 60Hz / 31Amps
Maximum
Temperature
Model: DMS-1218
150°F Approximate heat up time from 70°F to 150°F is
45-50 minutes.
Model: DMS-1826
150°F Max process temperature. Approximate heat up
time from 70°F to 150°F is 45-50 minutes.
Note
: Continuous overflow will require heated water
feed.
Ultrasonic
Frequency
132kHz Standard
