DMS-R-IM
Installation
April 7, 2021
Digital Modular System - Rinse
3-11
3.6
Electrical Installation
WARNING
All switches on the control panel should be in the
OFF
position before making any electrical connections. Failure to
do this could result in severe injury or death.
WARNING
Be sure to install the incoming wires to the main supply
disconnect in accordance to the national regulation and
applicable standards.
CAUTION
Be sure that the wire between console and electrical box are
routed in such a way to prevent mechanical damage, such as
routed under a raised floor or covered by a layer of metal
plate, in accordance to the national regulation and applicable
standards.
CAUTION
Observe and comply with all applicable electrical codes.
Follow all procedures for safe installation and use of electrical
devices.
CAUTION
It is important to ensure the 3-phase inlet power lead (L1, L2
and L3) connections are in correct phase. Wrong connection
will cause the 3-phase motor operates in wrong direction.
CAUTION
Please refer to the electrical schematics for power
requirements.
