DMS-R-IM
Installation
April 7, 2021
Digital Modular System - Rinse
3-13
3.6.1
Interconnect Wire Harness
WARNING
Do not run coaxial cables in wire way or conduit. Inductive
loads may be generated by proximity of cables in close spaces.
WARNING
Be sure to follow local grounding procedures as required for
this type of system. Do not operate this system without proper
ground connections.
The wire harness is supplied. Do not lengthen or shorten coaxial cables, as the
system has been tested and capacitance has been adjusted for this length of
cable.
Interconnecting wires have been marked with wire numbers according to the
electrical schematics.
Connect incoming power as required to the power lugs located on the
disconnect switch (supplied by customer). The main control enclosure should
be provided with a fused disconnect switch (supplied by customer).
Figure 3-5: Incoming power to main disconnect switch at each station electrical box – DMS-1218
Incoming Supply
L1, L2 & L3
