DMS-R-IM
Interpreting HMI
April 7, 2021
Digital Modular System - Rinse
5-12
5.6
Manual Function Screen
CAUTION
The pump and heater are only ON when low liquid sensor is
ON (tank liquid level is above low liquid level switch).
NOTE
“
*OPTIONAL
” wording will be displayed on the touch
screen when the particular option is not purchased by user or
the option is not enabled in the Setup 6 screen.
Note
: User can enable/disable options if applicable in the
Setup 6 screen by access level as Administrator.
NOTE
If all ultrasonic generators (1GEN, 2GEN, 3GEN & 4GEN) are
disable in Setup 6 screen, [SONIC] button and indicator will
invisible in Manual Function screen and Misc. screen. The
[SONIC] button and indicator will visible if either one of
ultrasonic generator (1GEN, 2GEN 3GEN or 4GEN) is enabled
in Setup 6 screen.
Note
: User can enable/disable options in Setup 6 screen by
access level as Administrator.
NOTE
In Manual Function screen has Spray and Air Blow function.
Spray and Air Blow have shortcut key at touch screen. Press
“F3” to turn ON spray solenoid valve and press “F4” to
activated blow off function.
Note
: Recommended user activated spray option before
immerse basket.
Enter Manual Function screen to manually turn ON/OFF heater, pump, sonic.
The components are triggered/activated from this screen when Auto mode
cycle is not initiated (when
[CYCLE START]
button at control panel is not
pressed yet).
