DMS-R-IM
Operation
April 7, 2021
Digital Modular System - Rinse
4-1
4.
Operation
4.1
Introduction
CAUTION
Recirculation pump, heater and ultrasonic can only be
triggered to turn ON when low liquid sensor is ON (tank
liquid level is above low liquid level).
NOTE
“
*OPTIONAL
” wording will be displayed on the touch
screen when the particular option is not purchased by user or
the option is not enabled in the Setup 6 screen.
Note
: User can enable/disable options if applicable in the
Setup 6 screen by access level as Administrator.
NOTE
Make sure front and rear panels are closed properly and
[EMO]
button is released before press [SYSTEM ON] button
at touch screen.
Before operating the system, user is required to perform manual check on items
as listed below in sequence:
Install pH probe sensor. (
*
Optional)
Electric power and DI water/chemical supply.
Clean, drain and fill DI water into wet tanks.
Power
ON
the system safely.
Cleaning bath temperature monitoring.
