DMS-R-IM
System Overview
April 7, 2021
Digital Modular System - Rinse
2-8
Item
Feature
Plumbing
(Fittings)
Stainless steel clamp fittings from tank converted to
welded type 300 series stainless steel with:
Compression fittings (up to 1” OD).
Threaded NPT pipe fittings (3/4” NPT to 1-1/2” NPT)
that are welded (for use with caustic aqueous and
semi-aqueous solutions).
Exceptions. The following items will have threaded
fittings with Teflon tape or Teflon pipe dope:
o
Pump heads (suction and discharge).
Instrumentation devices (i.e. flow-meters, pressure
gauges, etc.)
Tank Material
Type 316L stainless steel with a bright annealed finish.
Rounded corners in process area.
Tank Finishing
Electro polished interior tank surfaces in process area.
Frame Material
Type 304 stainless steel sheet metal frame with caster
wheels.
Front Access
Panels
Type 304, #4 finish, stainless steel lift out front panel
with louvers located lower bottom area (4 rows)
doors on the front.
Stainless steel lift-out recessed style handles.
Rear Access Panel
Top area with type 304, #4 finish, stainless steel lift
out front panel. Include lift-out recessed style
handles.
Bottom area mounted with exiting pipes.
Panel to include exhaust collar hole with cover plate
screwed over (for future use).
Side Access
Panels
Type 304, #4 finish, stainless steel lift out side panel.
Stainless steel lift-out recessed style handles.
Panel Future Add
On
Panel to have additional holes pre-punched and
plugged for future pipe or wire runs in/out of
module (filtration adder).
Countertop
A type 304 stainless steel, removable, marine style
countertop.
