DMS-R-IM
Preventive Maintenance
April 7, 2021
Digital Modular System - Rinse
6-6
6.5.2
Cleaning Carboy (Optional Item)
Figure 6-1: Carboy.
Step
Description
1
Power off the system and perform Lockout Tagout.
2
Close isolation valves immediately.
(refer to plumbing drawing for more detail)
3
Remove carboy male connector and tubing from carboy.
4
Rinse carboy with warm DI water for a few times. Soak it if necessary.
5
Dry it thoroughly before fill it with fresh detergent.
6
Insert the male connect and tubing and tighten it.
5
Remove the cartridge from shell by pulling up through the open top
of the housing.
Dispose of cartridge properly according to your local trash
regulations.
Carboy
Male Connector
Carboy Head
Tubing
