background image

 

www.avsl.com

                                                                                            154.103UK User Manual 

DMX-192 

192 Channel DMX Controller 

Item ref: 154.103UK 

User Manual 

 

 

 

 

A small yet versatile 192 channel DMX controller with 12 fixtures. Each fixture controls up to 16 channels 

per unit. There are 23 programmable bank buttons each holding 8 scenes. These scenes can be 
programmed into 6 chase sequences each holding up to 240 scenes which can be triggered by sound, 

manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. A lightweight 
and portable controller, ideal for small theatres or stage applications. 

 

In the box: 

 
Your DMX-192 should arrive with you in a single carton in good condition. The carton should contain  

1 x main unit, 1 x UK power adaptor and 1 x user guide. 
 

Controls Overview: 
 

 

 

Please read through this manual thoroughly before use, any damage  

caused by misuse of product will not be covered by warranty.

 

1. 

2. 

3. 

4. 

6. 

7. 

5. 

8. 

9. 

10. 

11. 

12. 

13. 

14. 

15. 

16. 

17. 

Summary of Contents for DMX-192







Reviews: