Task Force Tips TORNADO Instructions For Installation, Operation And Maintenance Download

Page: 1 / 20

©Copyright Task Force Tips LLC 2008-2021

LIY-300 May 28, 2021 Rev19

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

G-Force

INSTRUCTION FOR INSTALLATION, OPERATION, AND MAINTENANCE

TORNADO™ MONITOR

SERIES

DANGER

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/

serial-number.
This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel.

(see section 3.3)

for Flow/Pressure Operations Envelope

Summary of Contents for TORNADO





















Search results

Summary of Contents for TORNADO

Reviews:

Related manuals for TORNADO

Brands by name

Popular brands

Task Force Tips TORNADO, Instructions For Installation, Operation And Maintenance

Search results

Summary of Contents for TORNADO

Reviews:

Related manuals for TORNADO

Brands by name

Popular brands