manualshive.com logo in svg

Canon imageRUNNER 2525 Series, Service Manual, Page: 382 / 402

Share
Download
Canon imageRUNNER 2525 Series Service Manual Download Page 382

19. Remove the screw of the left cover, and then distort

it to remove the inside base cover.

• 1 Screw
• 2 Bosses
• 2 Hooks
• 2 Protrusions

1x

20. Remove the left cover.

1. Except for Europe model

• 1 Screw

CAUTION:

There is the link rod behind the left cover, which is
engaged to the switch on the power supply unit. So
carefully remove the left cover not to give an excessive
load on the link rod.

Link rod

1x

NOTE:

When reinstalling the left cover, surely insert the link rod
in the switch on the power supply unit so that the switch
can link to the main power switch of the host machine.

9. Installation

372

Summary of Contents for imageRUNNER 2525 Series



















































































































































































































































































































































































































Reviews:

No comments