Canon imageRUNNER 2525 Series, Service Manual, Page: 285 / 402

Details of [Bit 2]
To set whether to display SSL setting for Kerberos authentication of "LDAP Authentication Server Setting" in remote UI and set
the wording for selecting "login information".
When "0" is selected, SSL setting is displayed for Kerberos authentication and "Use / Use (Security Authentication)" is set for the
wording for selecting "login information".
When "1" is selected, SSL is grayed out for Kerberos authentication and "Simple/Anonymous Binding / Kerberos Binding" is set
for the wording for selecting "login information". (Initial value)
Details of [Bit 3]
To set whether to display "Auto Reset Time" menu on the Control Panel and set the location to display "Auto Reset Time" menu
in remote UI.
When "0" is selected, "Auto Reset Time" menu is displayed on the Control Panel, and "Auto Reset Time" menu in remote UI is
displayed under "Timer Settings". (The same as the conventional specification) (Initial value)
When "1" is selected, "Auto Reset Time" menu is not displayed on the Control Panel, and "Auto Reset Time" menu in remote UI
is displayed under "System Settings".
Details of [Bit 4]
To set whether to display "Restart Device" menu in remote UI.
Selecting "0" does not display the menu. (The same as the conventional specification) (Initial value)
Selecting "1" displays the menu.
Details of [Bit 5]
To set whether to preset the e-mail address of login user to the destination when logging in by auSend.
When "0" is selected, it is not preset. (The same as the conventional specification) (Initial value)
When "1" is selected, it is preset.
● SW18
List of functions
Bit Function 1 0
0 Not used - -
1 Not used - -
2 IC card authentication mode initialization judgment switch Initialized Not initial-
ized
3 Waste Toner Container parts counter initialization judgment switch Initialized Not initial-
ized
4 Initialization judgment switch for "Setup Guide", "FTP print", "DCM support", "remote access protection
support", and "DFU support" Initialized Not initial-
ized
5 Not used - -
6 Not used - -
7 Not used - -
Details of [Bit 2]
This switch is used to judge whether or not initialization of IC card authentication mode has been performed.
"0" means that the setting values are not initialized.
"1" means that the setting values are initialized.
Details of [Bit 3]
This switch is used to judge whether or not initialization of the Waste Toner Container parts counter has been performed.
"0" means that the setting values are not initialized.
"1" means that the setting values are initialized.
Details of [Bit 4]
8. Service Mode
275