manualshive.com logo in svg

Canon imageRUNNER 2525 Series, Service Manual, Page: 185 / 402

Share
Download
Canon imageRUNNER 2525 Series Service Manual Download Page 185

■ Procedure

1. Remove the controller plate. (Remove 3 screws.)

3x

2. For the model with a FAX and SEND function, press

the SW3 on the main controller to check that LED10
goes out. (Secondary power cutoff)

CAUTION:

The ADRAM is powered from the secondary battery
unit to back up the image memory even after the main
power switch is turned OFF and the power plug is
removed from the outlet.
If the SW3 on the main controller PCB is pressed with
the image backed up, the entire data stored in the
memory is cleared. Be sure to output the data stored
in the memory before pressing the SW3.

4. Disassembly/Assembly

175

Summary of Contents for imageRUNNER 2525 Series



















































































































































































































































































































































































































Reviews:

No comments