manualshive.com logo in svg

Canon imageRUNNER 2525 Series, Service Manual, Page: 327 / 402

Share
Download
Canon imageRUNNER 2525 Series Service Manual Download Page 327

3. Affix the document size label [A] of the suitable

paper size series to the feeder cover in such a
manner that the marks on the side guide (front) are
aligned with the corresponding marks on the
document size label when viewed by the user.

ATR/

11

x1

7

A4/A3

4. Affix the supplied finger pinch caution label 1 written

in an appropriate language.

5. Open the DADF.

6. Affix the supplied finger pinch caution label 2 written

in an appropriate language.

■ Affixing Labels to the Reader

1. If the following labels are supplied, go through the

steps described below.

• Copy inhibition label
• Glass cleaning/lamp caution label
• Lamp caution label

2. Open the platen cover or DADF.

3. Affix the copy inhibition label [A] (written in an

appropriate language) to the existing label.

[A]

9. Installation

317

Summary of Contents for imageRUNNER 2525 Series



















































































































































































































































































































































































































Reviews:

No comments