Canon imageRUNNER 2525 Series Service Manual Download Page 145

Page: 145 / 402

3. Remove the drum cartridge.

4. Open the toner supply cover.

5. Remove the toner supply cover.

• 2 screws (RS tightening; M3)
• 1 claw

Claw

Removing the Reader Right

Cover

1. Remove the reader right cover by removing four

screws, and then remove one screw from the reader
front cover.

1. Remove the reader right cover.

• 2 screws

Removing the Platen Glass

1. Open the ADF or platen cover.

2. Remove the glass retainer (right).

• 2 screws

3. Remove the platen glass.

4. Disassembly/Assembly

135

Summary of Contents for imageRUNNER 2525 Series



















































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2525 Series

Reviews:

Canon imageRUNNER 2525 Series, Service Manual, Page: 145 / 402

Search results

Summary of Contents for imageRUNNER 2525 Series

Reviews: