manualshive.com logo in svg

Canon imageRUNNER 2525 Series, Service Manual, Page: 328 / 402

Share
Download
Canon imageRUNNER 2525 Series Service Manual Download Page 328

4. Affix the glass cleaning/lamp caution label or lamp

caution label [B] written in an appropriate language
to the existing label. (The label written in English is
factory-affixed.)

[B]

■ Affixing a high temperature caution
label (only for CN and the model with
250-sheet cassette 1)

1. Press the cassette release button to draw out the

cassette forward.

2. Affix the High Temperature Caution Label to the

specified area. (area between screw holes on the
Base Plate)

CAUTION:

The High Temperature Caution Label uses a label
corresponding to the language.

High temperature Caution label

3. Install the removed Cassettes.

 Connecting the Cord

CAUTION:

The specified power must be supplied from outlet.
(Rated voltage ±10% at the rated current)

NOTE:

Install an optionally available document glass cover or the
DADF on the machine. If the model is the one without the
DADF, install a document cover glass. For how to install
the DADF, refer to the DADF Installation Procedure.

9. Installation

318

Summary of Contents for imageRUNNER 2525 Series



















































































































































































































































































































































































































Reviews:

No comments