Canon imageRUNNER 2525 Series Service Manual Download Page 335

Page: 335 / 402

2. Remove the rear cover (left).

• 2 Screws
• 2 Claws

3. Remove the Card Reader Lower Cover [1] from the

Card Reader Unit.

• 1 Screw [2]

[1]

[2]

4. Remove the Card Reader Fixation Plate [1] from the

Card Reader Unit.

• 1 Screw [2] (The removed screw will be used in step

6.)

[1]

[2]

5. Free the Grounding Wire [1] from the Card Reader

Unit. (The removed screw and toothed washer will
be used in step 7.)

• 1 Screw [2]
• 1 Toothed Washer [3]

[1]

[2]

[1]

[3]

9. Installation

325

Summary of Contents for imageRUNNER 2525 Series



















































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2525 Series

Reviews:

Canon imageRUNNER 2525 Series, Service Manual, Page: 335 / 402

Search results

Summary of Contents for imageRUNNER 2525 Series

Reviews: