manualshive.com logo in svg

Canon imageRUNNER 2525 Series, Service Manual, Page: 140 / 402

Share
Download
Canon imageRUNNER 2525 Series Service Manual Download Page 140

External / Internal Cover

 Removing the Reader Left

Cover

1. Remove the reader left cover.

• 2 screws (RS tightening; M3)

2x

 Removing the Reader Front

Cover

1. Open the platen cover (ADF/platen board cover).

2. Remove the reader front cover.

• 2 screws (RS tightening; M3)

2x

 Removing the Support Cover

1. Open the right cover.

2. Remove the support cover.

• 2 screws (RS tightening; M3)
• 2 claws
• 1 boss

2x

2x

 Removing the Delivery Tray

■ Preparation

1. Remove the support cover.

“Removing the Support

Cover” on page 130

2. Remove the toner supply cover.

“Removing the

Toner Supply Cover” on page 134

3. Remove the inside base cover.

“Removing the Inside

Base Cover” on page 133

4. Disassembly/Assembly

130

Summary of Contents for imageRUNNER 2525 Series



















































































































































































































































































































































































































Reviews:

No comments