install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
To Remove Mark Points:
When setting new in and out points, you first need to remove each point before
selecting a new ones. This not only ensures the new points are added, but it also
allows you to view/scrub footage beyond the previous in and out points.
Press the
[Rem Mark In]
and/or
[Rem Mark Out]
PixButtons. When pressed, the
respective letters “I” and/or “O” that had been appended to the clip name in the
display will disappear to let you know that the mark points are gone.
6.3.2 Auto Start
When clips are selected from the Clip Store, they must be manually started with the
[>] motion button. Instead, the auto-start function may be set to automatically begin
playing from its Mark-In point (or from the beginning if no mark in point is set) when
taken to air, by pressing [Cut], [Auto Trans] or using the [Fader].
To turn on Auto Start:
1.
Select the desired clip, and press the
[Controls]
button on any Clip PixPad.
2.
Press the
[Auto Start OnOff]
PixButton and the letter “A” will be appended to the
clip name in the display to let you know that the Auto-Start function has been turned
on for that clip. (If other modifiers are turned on they will also appear)
6.3.2
Clip: 01 Head Open (A)
Scrub
0:00:00
To let you know that Mark-In and Mark-Out points have be set for a clip, the letters “I”
and/or “O” respectively are appended to the clip name in the display as illustrated below:
Clip: 01 Head Open (IO)
Scrub
0:00:00
