install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
7.19.4
5.
When multiple Macros are assigned to
an input, there is an option to not play
the same Macro back to back. This
option allows for unique Macros to be
triggered with every switch giving a
more natural look to the production, and
not one from an automated system.
Under the Addition settings: section,
place a checkmark next to
Never play
the same macro back to back,
as
shown on the right.
6.
When multiple Macros are assigned to
an input, there is an option to switch
after the defined minimum time. This
option adds a more dynamic and lively
look to the production.
Under the Addition settings: section,
place a checkmark next to
Switch
through mic macros after minimum
time,
as shown on the right.
Note: if a Macro is using Camera
Control to move cameras, having this
option checked may show on-air
camera moves, if the Macro is not
written correctly. To avoid on-air moves,
ensure that the Macro first switches to a
known good/static source, then move
the camera and finally switch to the
camera input.
7.
To prevent accidental switches when a
cough or short response is spoken there
are advanced timing settings that filter
out the short answers. These settings
can be modified under the
Advanced
timing settings
section. It is
recommended to use the default
settings.
