install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
4.3.6
6.
To fade from black, click on the
Program monitor and the FTB button
on multi-view will turn grey, as shown
on the right
7.
If a physical button is required, FTB
may be included as part of a Macro,
then assigned to the MEM device.
To modify the FTB rate on the panel:
1.
Press the
[FX]
button in the transition
section, and it will illuminate amber.
2.
Press on the
[Controls]
PixButton in
the FX PixPad, as shown on the right.
3.
Press the
[FTB Rate]
PixButton and a
numeric pad will appear.
4.
Enter the desired fade to black rate
with the
[Numbers]
PixButtons. As
you enter each number it will appear
in the display.
5.
Press the
[Enter]
PixButton.
To execute FTB on a 500 or 2000 panel:
1.
Press the
[FTB]
button in the
transitions section, as shown on the
right.
The Program output will fade at the
selected rate, and the FTB button will
illuminate red and start blinking.
2.
To fade from black, press the
[FTB]
button in the transition section, and
the button will turn off.
