install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
4.
Select the desired
Mode
to modify either Mode 1 –
Mode 11, the PixButton will highlight orange, as
shown on the right.
To select Modes 12-22 select the
View Modes
12-22
button, as shown on the right.
5.
The bottom window will update to show the current
state of the mode.
In the Switcher Inputs section, click on the
input
to
enable or disable 1 through 6, the PixButtons will
update to Grey or Green, as shown to the right.
Grey PixButtons signify that the input or output is
blocked and not accessible from the Remote
Panel. Green PixButtons signify that the input or
output is allowed for selection.
The inputs shown are the direct inputs to the Flint
Switcher and the names are automatically created
from the Flint Input Assignments window. They
may not be reordered.
4.10.3