install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
5.9.7
To Configure US Weather:
1.
Click on the
Data Sources Menu
and a drop
down menu will appear, as shown on the right.
2.
Select the
U.S. Weather
option and the Data
Panel will change to view the US Weather
properties.
3.
In the
Zip:
text field enter the desired zip code
for a U.S. city, as shown on the right.
4.
Click on the
Get
button to activate the weather
feed.
The name of the city and state will appear in the
display area, plus list of weather conditions will
appear in a grid below the zip code entry.
5.
To receive multiple weathers feeds repeat steps
3 & 4 above.
6.
To have the Weather feeds cycle through the
entire list of zip codes,
enter
an update rate
between 5 - 60 seconds, at the bottom of the
Data Panel, as shown on the right.
7.
To activate the advance, select the
Auto
Advance Zip
button, it will illuminate blue and
begin to countdown and cycle through the zip
codes. The information in the feed will update
using a cut transition.
An additional service that is bundled within the Data Panel is access to weather for a
United States city based off a zip code. Weather for international cities is not
provided. Multiple weather feeds may be subscribed to and advanced per project. If
no Internet connection is detected this feature is not available.
