BinTec X3200, User Manual

Page: 268 / 419

268 BinTec Communications AG
Security Mechanisms
7
The statistics for IP connections are displayed. You can find the meaning of the
MIB variables in the MIB Reference.
➤
Select c to display statistical data for ICMP.
➤
Select i to display statistical data for IP.
➤
Select u to display statistical data for UDP.
➤
Select t to display statistical data for TCP.
7.1.3 Credits Based Accounting System
Credits X3200 ’s Credits Based Accounting System enables you to control the charges
billed. This means you can keep the effects of possible configuration errors
within limits. The system also enables you to define the maximum number of
connections allowed in a certain period of time. You can make settings for cer-
tain subsystems (
➤➤
PPP ,
➤➤
CAPI ,
➤➤
ISDN Login ) to define the num-
ber of connections, the connection time and the ISDN charges billed. If the
defined limit is exceeded, X3200 cannot set up any more connections within the
defined period of time. This means you can detect configuration errors in good
time, before your telephone bill gets too big!
Syslog messages Syslog messages are generated if the number of connections reaches 90 % or
100 % of the limit and if a connection is prevented by the Credits Based Ac-
counting System because the limit is exceeded.
X3200 Setup Tool BinTec Communications AG
[MONITOR][IP]: IP Statistics MyRouter
InReceives 3912 OutNoRoutes 0
InHdrErrors 0 ReasmTimeout 500
InAddrErrors 0 ReasmReqds 0
ForwDatagrams 0 ReasmOKs 0
InUnknownProtos 0 ReasmFails 0
InDiscards 0 FragOKs 0
InDelivers 3321 FragFails 0
OutRequests 9 FragCreates 0
OutDiscards 0 RoutingDiscards 0
EXIT
I(C)MP (I)P (U)DP (T)CP