BinTec X3200, User Manual

Page: 324 / 419

324 BinTec Communications AG
Configuration Management
8
➤
Enter
y
and confirm with Return.
The software update is executed and the new system software is loaded in
the flash memory.
The following appears in the SNMP shell: Reboot now (y or n)?
➤
Enter
y
and confirm with Return.
X3200 starts with the new system software. The existing configuration is
transferred.
X3200 requires a connected block of free working memory that is somewhat
larger than the new system software. If insufficient memory is available on
X3200 , X3200 offers an incremental update, in which the software is loaded
directly in "chunks" to the flash memory without checking. Proceed as follows:
If insufficient memory is available, a query will appear in the SNMP shell:
Do you want to perform an incremental update (y or n)?
➤
First enter
n
.
➤
Type in
update -v <IP address> <file name>
.
The image is checked, but not yet loaded.
➤
Type in
update <IP address> <file name>
.
The following appears in the SNMP shell: Perform update (y or n)?
➤
Enter
y
and confirm with Return.
X3200 performs an incremental update and the software is loaded to the
flash memory. This procedure takes longer than a normal update!