BinTec X3200, User Manual

Page: 275 / 419

X3200 User’s Guide 275
Activity Monitoring
7
The configuration is made in S
YSTEM
➧
E
XTERNAL
A
CTIVITY
M
ONITOR
:
Table 7-7: S
YSTEM
➧
E
XTERNAL
A
CTIVITY
M
ONITOR
To do Proceed as follows:
➤
Go to S
YSTEM
➧
E
XTERNAL
A
CTIVITY
M
ONITOR
.
➤
Enter Client IP Address, e.g. the IP address of your PC.
➤
Enter Client UDP Port:
2107.
Field Meaning
Client IP Address IP address to which X3200 sends the UDP
packets.
The default value 255.255.255.255 means that
the broadcast address of the first LAN interface
is used.
Note: If you enter the IP address of a WAN
partner that can be reached over an ISDN dia-
lup connection, you will get a large telephone
bill due to frequent setting up of ISDN connec-
tions (a packet is usually sent every 5 sec-
onds).
Client UDP Port Port number for Activity Monitor (default
value: 2107, registered by IANA - Internet
Assigned Numbers Authority).
Type Type of information sent in the UDP packets to
the Windows application. Possible values:
■
off: deactivates Activity Monitor (default
value)
■
physical: only information about physical in-
terfaces
■
physical_virt: information about physical
and virtual interfaces
Update Interval (sec) Update interval in seconds. Possible values: 0
to 60 (default value: 5).