BinTec X3200, User Manual

Page: 88 / 419

88 BinTec Communications AG
Connecting X3200
4
Access information (user names and passwords) can also only be changed if
you log in with the user name
admin
. For security reasons, passwords are not
normally shown on the Setup Tool screen in plain language, but only as aster-
isks. The user names appear in plain language. The security concept of X3200
enables you to read all the other configuration settings with the user name
read
, but not the access information. It is therefore impossible to log in with
read
, read the password of the
admin
user and subsequently log in with
ad-
min
and make changes to the configuration.
This is how you log in:
➤
Type in your user name (e.g.
admin
) and press Return.
➤
Type in your password (e.g. bintec ) and press Return.
Your router then issues an input prompt, e.g.
X1200:>
. The login was suc-
cessful.
Closing the SNMP shell To leave the SNMP shell after completing the configuration, enter
exit
and
press Return.
Caution!
To prevent unauthorized access to X3200 , you should change the passwords
right away, in case you did not do this during the basic configuration with the
Configuration Wizard .
➤
Change the passwords as described in chapter 5.1.2, page 105 .