BinTec X3200, User Manual

Page: 41 / 419

X3200 User’s Guide 41
Installing BRICKware Under Windows
3
3.3 Installing BRICKware Under Windows
➤
Close all Windows programs on your PC.
➤
Place your BinTec Companion CD in the CD-ROM drive of your PC.
The start window appears automatically after a short time.
➤
If the Start window does not open automatically, click your CD-ROM drive
in Windows Explorer and double-click setup.exe. (Or click Settings
➧
Control Panel. First click Software and then Install. Follow the instruc-
tions on the screen.)
➤
Select the desired language in the Start window or leave the default setting.
➤
Select BRICKware.
The configuration assistant is activated.
If the version of BRICKware saved on your PC is older than version 5.2.1, you
will be asked to deinstall this so that you can install the current version of
BRICKware .
After version 5.2.1, you can carry out an update on your BRICKware .
If you already have the current version of BRICKware installed on your PC, you
can select from various installation possibilities during a new installation.
Deinstalling If you are requested to deinstall BRICKware , follow the instructions on the
screen to remove the program from your PC. The win.ini file is saved on your
PC before deinstallation.
A window informs you as soon as BRICKware is deinstalled and you can now
install the software again.
New installation Proceed as follows to install BRICKware :
➤
Click Next.
➤
Enter the directory in which BRICKware is to be installed or accept the de-
fault directory.
➤
Click Next.
➤
Select your router type, i.e. the group X1000, X1200, X3200 or X4000.
➤
Click Next.