BinTec X3200, User Manual

Page: 269 / 419

X3200 User’s Guide 269
Activity Monitoring
7
The whole account is available again if you switch X3200 off and then switch it
on again (i.e. reboot).
Configuration is made in CREDITS
➧
ISDN C
REDITS
or CREDITS
➧
X
DSL
C
REDITS
➧
PPP
O
E C
REDITS
.
Field Meaning
Surveillance Defines whether the Credits Based Accounting
System is to be activated for the respective
subsystem. Possible values:
off, on.
With
on, you can define the parameters listed
below.
Measure Time (sec) Time in seconds for which the limit applies.
Maximum Number of
Incoming Connections Number of incoming connections allowed dur-
ing the Measure Time (sec); displayed only for
ISDN connections.
If you activate this setting with
on, you can
enter the desired value in the line below.
Maximum Number of
Outgoing Connections Number of outgoing connections allowed dur-
ing the Measure Time (sec).
If you activate this setting with
on, you can
enter the desired value in the line below.
Maximum Charge Maximum charges allowed (amount, units) dur-
ing the Measure Time (sec); displayed only for
ISDN connections.
If you activate this setting with
on, you can
enter the desired value in the line below.
Maximum Time for
Incoming Connections
(sec) Maximum time in seconds allowed for incoming
connections during the Measure Time (sec);
displayed only for ISDN connections.
If you activate this setting with
on, you can
enter the desired value in the line below.