BinTec X3200, User Manual

Page: 271 / 419

X3200 User’s Guide 271
Activity Monitoring
7
➤
Activate Maximum Time for Outgoing Connections (sec), if applicable,
and enter the desired value.
➤
Activate Maximum Number of Current Incoming Connections, if appli-
cable, and enter the desired value.
➤
Activate Maximum Number of Current Outgoing Connections, if appli-
cable, and enter the desired value.
➤
Press SAVE.
Proceed as follows to configure a Credits Based Accounting System for PPPoE
connections:
➤
Go to CREDITS
➧
X
DSL C
REDITS
➧
PPP
O
E C
REDITS
.
➤
Select Surveillance: on, if you want to use the Credits Based Accounting
System.
➤
Enter Measure Time (sec), e.g. 86400 (= 24 hours).
➤
Activate Maximum Number of Outgoing Connections, if applicable, and
enter the desired value.
➤
Activate Maximum Time for Outgoing Connections (sec), if applicable,
and enter the desired value.
➤
Press SAVE.
7.1.4 HTTP Status Page
Every BinTec router is equipped with an internal home page, the so-called
HTTP status page. You can use this together with an Internet browser (e.g.
Netscape Navigator, Internet Explorer) to display the status of X3200 . This en-
ables all users of the X3200 LAN to take a look at the status of the router, pro-
vided they know the password for the user name
http
.
Please note: HTTP pages are usually stored in the cache memory of the
browser. This means they can possibly be read by other users at the same
workspace and may also be visible at proxy
➤➤
servers involved.