BinTec X3200, User Manual

Page: 120 / 419

120 BinTec Communications AG
Basic Configuration with the Setup Tool
5
Table 5-8: Item
To do Make the following entries:
➤
Select the Item, e.g. PPP (routing) .
➤
Enter the Number, e.g. 10 .
➤
Select the Mode, e.g. right to left .
➤
Select the Bearer, e.g. data .
➤
Press SAVE.
You have returned to the menu CM-1BRI, ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
. The entries are saved and displayed in the list.
You have now assigned one of your extensions ( 10 ) to a possible service
( PPP (routing) ). That is, if a data call is received by called party number
10, it is forwarded to the PPP (routing) service.
➤
Repeat these steps until you have assigned to all phone numbers the ser-
vices to be reached under these numbers.
This concludes the configuration of Incoming Call Answering. X3200 now
distributes the incoming calls to the internal services. These numbers and
the assigned services are also used for outgoing calls
PPP V.110
(1200...38400) Permits PPP connections to V.110 at bit rates
of 1200 bps, 2400 bps,..., 38400 bps.
Pots
Not available in X3200 .
PPP Modem Profile 1...8 Not available in X3200 .
CAPI 1.1 EAZ 0...9
Mapping Enables connections with Remote CAPI appli-
cations. Required for CAPI 1.1 applications
only.
X.25 PAD Not available in X3200 .
Possible Values Meaning
As X3200 forwards all incoming calls that do not match an entry in this menu to
the
➤➤
CAPI service, it is not necessary to enter CAPI (except for CAPI 1.1
applications)!