BinTec X3200, User Manual

Page: 183 / 419

X3200 User’s Guide 183
Settings Specific to WAN Partners
6
6.2 Settings Specific to WAN Partners
Specific functions for
➤➤
WAN partners make it possible to define the char-
acteristics for connections to WAN partners individually. Carry out the configu-
ration steps described separately for each WAN partner.
■
Delay after Connection Failure ( chapter 6.2.1, page 183 )
■
Channel Bundling - Basic Configuration for Dialup Connections
( chapter 6.2.2, page 184 )
■
Channel Bundling - Bandwidth on Demand (BOD) - Advance Configuration
for PPP Connections ( chapter 6.2.3, page 186 )
■
Always On/Dynamic ISDN (AO/DI) ( chapter 6.2.4, page 192 )
■
BOD for IP-Based Applications ( chapter 6.2.5, page 201 )
■
Layer 1 Protocol ( chapter 6.2.6, page 206 )
■
IP Transit Network ( chapter 6.2.7, page 208 )
■
Transfer of DNS and WINS Server IP Addresses to WAN Partners
( chapter 6.2.8, page 210 )
■ ➤➤
RIP ( chapter 6.2.9, page 213 )
■
Compression:
➤➤
VJHC ,
➤➤
STAC , MS-STAC ( chapter 6.2.10,
page 216 )
■ ➤➤
Proxy ARP ( chapter 6.2.11, page 218 )
■
Keepalive Monitoring ( chapter 6.2.12, page 220 )
The configuration steps necessary in each case are explained in detail below.
6.2.1 Delay after Connection Failure
This function enables you to set the period of time X3200 is to wait after an un-
successful attempt to set up a call.