BinTec X3200, User Manual

Page: 247 / 419

X3200 User’s Guide 247
Basic IP settings
6
Table 6-48:
IP
➧
S
TATIC
S
ETTINGS
To do Proceed as follows to change one of the port numbers:
➤
Go to IP
➧
S
TATIC
S
ETTINGS
.
➤
Enter Remote CAPI Server TCP Port, Remote TRACE Server TCP Port,
RIP UDP Port and/or HTTP TCP Port.
➤
Press SAVE.
6.3.4 BOOTP Relay Agent
Bootstrap protocol The Bootstrap Protocol (
➤➤
BOOTP ) defines how a host (BOOTP
➤➤
client ) in a TCP/IP network receives his IP address and other configura-
tion information on booting. The BOOTP client sends a BOOTP Request, a
BOOTP server answers the request with a BOOTP Response and supplies the
client with the necessary information. As the server only hears requests from
the LAN in which it is located, it is sometimes advisable to set up a BOOTP Re-
RIP UDP Port
Port number for
➤➤
RIP (Routing Information
Protocol). Default value: 520. The RIP can be
disabled with RIP UDP Port =
0.
HTTP TCP Port Port number for HTTP Requests. Default value:
80. HTTP TCP Port =
0 disables access to
X3200 ’s HTTP status page (see chapter 7.1.4,
page 271 ).
Field Meaning