BinTec X3200, User Manual

Page: 31 / 419

X3200 User’s Guide 31
3
3 Getting Started
This chapter will help you to configure the most important and common applica-
tions for your local network or your single-user system as quickly as possible. A
configuration assistant, the Configuration Wizard , helps to make the configu-
ration as easy as possible. With its help, you can configure X3200 in a matter
of minutes.
At the end of this chapter you will be able to:
■
Reach X3200 in the LAN
■
Surf the Internet
■
Sending and receiving faxes
■
If necessary, establish a connection to a remote network (LAN-LAN con-
nection, e.g. to your head office) to access corporate data from the comfort
of your home office.
In order to set up these applications, you must first carry out the following:
■
X3200 set-up and connections ( chapter 3.1, page 32 )
■
Make a number of preparations ( chapter 3.2, page 35 )
■
Install Windows software:
– Install BRICKware for Windows ( chapter 3.3, page 41 )
– Configure X3200 with the Configuration Wizard ( chapter 3.5, page 48 )
– Configure the Remote CAPI interface ( chapter 3.6, page 63 )
■
Make possible additional settings on your PC ( chapter 3.7, page 65 )
■
Install and configure RVS-COM Lite ( chapter 3.8, page 70 )
We will explain how to test the configuration at the end of this chapter.
After finishing the basic configuration, you can optimize your configuration as
described in
chapter 6, page 173 .
If you would like to know how to carry out the basic configuration without the
Configuration Wizard (e.g. if you are not using a Windows operating system),
read
chapter 5, page 101 .