BinTec X3200 User Manual Download Page 168

Page: 168 / 419

168

BinTec Communications AG

Basic Configuration with the Setup Tool

➤

Select IP Transit Network:

Dynamic Server.

Defining address pool

➤

Select Advanced Settings and press Return.

➤

Select RIP Send:

none.

➤

Select RIP Receive:

none.

➤

Deactivate Van Jacobson Header Compression:

off.

➤

Deactivate Dynamic Name Server Negotiation:

off.

➤

Enter IP Address Pool:

➤

Deactivate IP Accounting:

off.

➤

Deactivate Back Route Verify:

off.

➤

Select Route Announce:

up or dormant.

➤

Select Proxy Arp:

off.

➤

Confirm with OK.

➤

Press SAVE.

You have returned to the menu

WAN P

ARTNER

➧

ADD.

Setting short hold

➤

Select Advanced Settings and press Return.

➤

Select Callback:

no.

➤

Enter Static Short Hold (sec), e.g.

300

, i.e. a high value.

➤

Enter Idle for Dynamic Short Hold (%), e.g.

➤

Enter Delay after Connection Failure (sec), e.g.

➤

Leave out Extended Interface Settings (optional).

➤

Select Channel Bundling: e.g.

➤

Select Layer 1 Protocol:

ISDN 64 kbps.

➤

Confirm with OK.

You have returned to the menu

WAN P

ARTNER

➧

ADD.

➤

Press Save.

➤

Leave

WAN P

ARTNER

with EXIT.

Entering IP address

➤

Go to

➧

IP A

DDRESS

OOL

WAN (PPP)

➧

ADD.

Summary of Contents for X3200



































































































































































































































































































































































































































Search results

Summary of Contents for X3200

Reviews:

Related manuals for X3200

Brands by name

Popular brands

BinTec X3200, User Manual

Search results

Summary of Contents for X3200

Reviews:

Related manuals for X3200

Brands by name

Popular brands