BinTec X3200, User Manual

Page: 186 / 419

186 BinTec Communications AG
Advanced Configuration
6
To do Proceed as follows:
➤
Go to WAN P
ARTNER
➧
E
DIT
➧
A
DVANCED
S
ETTINGS
.
➤
Select Channel Bundling: dynamic or static.
➤
Enter Total Number of Channels.
➤
Confirm with OK.
➤
Press SAVE.
Refer to the advanced configuration options (Bandwidth on Demand BOD), see
chapter 6.2.3, page 186 .
6.2.3 Channel Bundling – Bandwidth on Demand
(BOD) – Advanced Configuration for PPP Con-
nections
Bandwidth management, subsequently called BOD (Bandwidth on Demand),
offers advance configuration options for dialup connections compared with the
basic configuration (see chapter 6.2.2, page 184 ). You can either add or close
B-channels according to the expected throughput, or you can configure addi-
tional B-channels for specific applications (see chapter 6.2.5, page 201 ) You
can also use BOD to dynamically bundle leased lines with dialup connections
to cope with a large data flow. You can also easily configure a backup mode for
leased lines, so that a dialup connection is set up to the partner if the leased line
fails.
You also have a facility for defining the possible use of the Bandwidth Allocation
Control Protocol (BACP/BAP to RFC 2125).
Authentication PPP authentication of the connection partner is typically not necessary for set-
ting up a leased line, but authentication is necessary for any dialup connections
switched in.
BOD is configured in
■
WAN P
ARTNER
➧
E
DIT
➧
A
DVANCED
S
ETTINGS
➧
E
XTENDED
I
NTERFACE
S
ETTINGS
(
OPTIONAL
)