BinTec X3200, User Manual

Page: 222 / 419

222 BinTec Communications AG
Advanced Configuration
6
If all PCs in the LAN at the branch office were inactive, a connection to the head
office is not set up automatically as soon as one of the PCs to be monitored is
switched on. The interface to the "head office" WAN partner is not activated, i.e.
a connection cannot be set up to the head office, until X3200 has registered that
a PC can be reached. The amount of time that expires before X3200 indicates
that a PC can be reached again depends on the monitoring interval set
(Interval).
Configuration is made in S
YSTEM
➧
K
EEPALIVE
M
ONITORING
➧
ADD:
The corresponding WAN partner, i.e. the head office, must be identifiable in
X3200 via CLID (Calling Line Identification). If this is not the case, Keepalive
Monitoring may not function.
Field Meaning
Group Defines a group of hosts, whose reachability is
to be monitored by
X3200 . Each host to be
monitored is assigned to a group. A total of ten
groups can be configured with up to ten hosts
each.
Possible values: 0 ... 9.
IPAddress Defines a host that is to be monitored by
X3200 .
Interval Defines the time interval in seconds to be used
for checking the reachability of hosts (default
value:
300).
The smallest time interval is used within a
group, i.e. all the hosts in a group are checked
by
X3200 at the smallest time interval of the
group.