BinTec X3200, User Manual

Page: 340 / 419

340 BinTec Communications AG
Technical Data
10
The corresponding function LED lights as long as a test is in progress and goes
out when the test is completed. If an error occurs during the test, the Error LED
lights together with the corresponding function LED.
BOOTmonitor Mode
Table 10-3: LEDs in BOOTmonitor mode
Normal Mode
LED State Meaning
PWR On Power supply connected.
xDSL, LAN,
L1, L2 On Switching X3200 off and on three times resets
the equipment to the ex works state.
LAN Blinking TFTP transfer being carried out.
L1, L2 On BOOTmonitor is active (or waiting for a key-
board entry).
L1, L2 Blinking BOOTmonitor is compressing system soft-
ware.
ERR On An error has occurred during the boot opera-
tion, which means
X3200 cannot boot.
LED State Meaning
PWR On Power supply connected.
xDSL, LAN,
L1, L2 Blinking
(three
times) Resetting X3200 to the ex works state was
successful.
xDSL On Data packet passing through the LAN inter-
face.
xDSL Blinking Connection is being set up (ADSL). (2)
xDSL On Connection is active (ADSL). (1) (2)
LAN On Data packet passing through the LAN inter-
face.
L1 Blinking ISDN B1-channel: Connection is being set up.