BinTec X3200, User Manual

Page: 159 / 419

X3200 User’s Guide 159
X3200 and the WAN
5
➤
Confirm with OK.
You have returned to the menu WAN P
ARTNER
➧
ADD.
Setting short hold
➤
Select Advanced Settings and press Return.
➤
Select Callback: no.
➤
Enter Static Short Hold (sec), e.g. 90 . (If you use a flat-rate connection,
you can enter Static Short Hold (sec)
-1.)
➤
Enter Idle for Dynamic Short Hold (%): 0.
➤
Enter Delay after Connection Failure (sec), e.g. 300 .
➤
Select Layer 1 Protocol: PPP over PPTP.
➤
Leave out Extended Interface Settings.
➤
Confirm with OK.
You have returned to the menu WAN P
ARTNER
➧
ADD.
Carrying out IP
configuration
➤
Select IP and press Return.
➤
Enter VPN Partner’s IP Address : e.g.
10.0.0.138
.
➤
Select via IP Interface : en3.
➤
Enter local IP Address: 10.0.0.140.
➤
Leave out Advanced Settings.
➤
Press SAVE.
You have returned to the menu
WAN P
ARTNER
➧
ADD.
➤
Press SAVE.
➤
Leave WAN P
ARTNER
with EXIT.
Creating routing entry
➤
Go to IP
➧
R
OUTING
.
➤
Add a new entry with ADD.
➤
Select Route Type: Default route.
➤
Select Network: WAN without transit network.
➤
Select Partner / Interface: Telekom_Austria.
➤
Enter Metric, e.g. 1 .