BinTec X3200, User Manual

Page: 155 / 419

X3200 User’s Guide 155
X3200 and the WAN
5
To do Make the following entries:
➤
Select Network Address Translation: on.
➤
Press SAVE.
Network Address Translation is activated for the selected interface or WAN
partner.
➤
Leave IP
➧
N
ETWORK
A
DDRESS
T
RANSLATION
with EXIT.
➤
Leave IP with EXIT.
You have returned to the main menu and have configured a WAN partner.
5.2.2 Internet Access with X3200
Examples A few examples are given here following the general procedure described in
chapter 5.2.1, page 131 , which you can basically use for any Internet Service
Provider (ISP). They show you how to set up Internet access to certain provid-
ers quickly and easily. Example 1 shows in detail what you must do to configure
high-speed access.
■
Example 1: T-Online (high-speed access)
X3200 Setup Tool BinTec Communications AG
[IP][NAT][CONFIG]: NAT Configuration (GoInternet) MyRouter
Network Address Translation on
Configuration for sessions requested from outside
Service Destination Source Dep. Dest. Dep. Port Remap
ADD DELETE SAVE CANCEL
Use <Space> to select
If NAT is activated, only outgoing connections are allowed. To allow incoming
connection to hosts in your LAN, these connections must be explicitly allowed.
See
chapter 7.2.7, page 282 on how to proceed.