BinTec X3200, User Manual

Page: 270 / 419

270 BinTec Communications AG
Security Mechanisms
7
Table 7-5: CREDITS
➧
ISDN CREDITS resp. CREDITS
➧
X
DSL
C
REDITS
➧
PPP
O
E CREDITS
To do Proceed as follows to configure a Credits Based Accounting System for ISDN
connections:
➤
Go to CREDITS
➧
ISDN C
REDITS
.
➤
Select a subsystem and confirm with Return.
➤
Select Surveillance: on, if you want to use the Credits Based Accounting
System for the selected Subsystem.
➤
Enter Measure Time (sec), e.g.
86400
(= 24 hours).
➤
Activate Maximum Number of Incoming Connections, if applicable, and
enter the desired value.
➤
Activate Maximum Number of Outgoing Connections, if applicable, and
enter the desired value.
➤
Activate Maximum Charge, if applicable, and enter the desired value.
➤
Activate Maximum Time for Incoming Connections (sec), if applicable,
and enter the desired value.
Maximum Time for
Outgoing Connections
(sec) Maximum time in seconds allowed for outgoing
connections during the Measure Time (sec).
If you activate this setting with
on, you can
enter the desired value in the line below.
Maximum Number of
Current Incoming
Connections Maximum number of incoming connections
allowed at any one time; displayed only for
ISDN connections.
If you activate this setting with on, you can
enter the desired value in the line below.
Maximum Number of
Current Outgoing
Connections Maximum number of outgoing connections
allowed at any one time; displayed only for
ISDN connections.
If you activate this setting with on, you can
enter the desired value in the line below.
Field Meaning