BinTec X3200, User Manual

Page: 355 / 419

X3200 User’s Guide 355
SNMP Shell Commands
11
date
date [YYMMDDHHMMSS]
X3200 has a software clock. Entering
date
displays the time set.
Entering
date YYMMDDHHMMSS
sets the clock to the corresponding value
(year, month, day, hour, minute, second).
t
t [<seconds>]
Is used to define the auto logout time for the current login session (a connection
to X3200 over telnet, ISDN login or serial interface is normally disconnected au-
tomatically if no entry is made on the keyboard for 15 minutes).
–
seconds
: auto logout is activated after
seconds
. Entering
t 0
deac-
tivates auto logout.
nslookup
nslookup [-an] [-t <type>] [-w <sec>] [-r <ret>] ipaddr |
name [<server>]
Is used to check how a name or an IP address is resolved by X3200 or another
name server.
–
-a
: displays all the data received.
–
-n
: prevents the resolution of the indicated name server address (with-
out this option, an attempt is made to resolve the address of the name
server).
–
-t <type>
: executes <type> requests. Possible values for type: 0, A,
NS, MD, MF, CNAME, SOA, MB, MG, MR, NULL, WKS, PTR, HINFO,
MINFO, MX, TXT, ANY or any decimal number.
–
-w <sec>
: wait <sec> before sending a new request (default value: 3).
– -
r <ret>
: send a request maximum <ret> times (default value: 5).
–
ipaddr
: IP address to be resolved.
–
name
: name to be resolved.