BinTec X3200, User Manual

Page: 254 / 419

254 BinTec Communications AG
Advanced Configuration
6
The Send RIP/SAP Updates field is for defining how often
➤➤
RIP and SAP
packets are sent by X3200 to the WAN partner. The field contains the following
selection options, which are explained with the aid of a table:
Table 6-54: Send RIP/SAP Updates
To do Proceed as follows:
➤
Go to WAN P
ARTNER
➧
E
DIT
➧
IP.
➤
Select Enable IPX:
yes.
➤
Enter IPX NetNumber, e.g. 0 .
➤
Select Send RIP/SAP Updates.
➤
Enter Update Time, if applicable.
Possible values for
Send RIP/SAP
Updates
New
connection
opened? Update the
existing
tables?
Periodic
update?
Remarks
off never no no All routes and services
must be entered stati-
cally.
tri piggyback
(on changes, only if
link active) only for
changes yes yes This is the default set-
ting, which is sufficient in
most cases.
triggered (on changes) only for
changes yes no Less data traffic than
tri piggyback,
but also less reliable.
piggyback (only if link
active) never yes yes At least 1 static route
and 1 static service must
be entered for the WAN
partner.
passive triggered (on
changes only if link
active) never yes no At least 1 static route
and 1 static service must
be entered for the WAN
partner.
timed update (always)
always yes yes Cost-intensive!